Name:Load switch
FOB Port:Ningbo/Shanghai/Yiwu/Guangzhou/Shenzhen
Terms of Payment:T/T
Tel: +86 13706784523(Whatsapp)/
Email: amy@putai-electric.com /
Name:Load switch
FOB Port:Ningbo/Shanghai/Yiwu/Guangzhou/Shenzhen
Terms of Payment:T/T
FN7-12 type indoor high-voltage load switch and fuse combination is a new type of gas-producing indoor high-voltage load switch, which is suitable for use in three-phase AC power systems with AC 50Hz and rated voltage of 12KV as a means of breaking load currents and closing short-circuit currents.
It is suitable for AC 50Hz, rated voltage 12KV three-phase AC power system, as the opening and closing of load current and short-circuit current.
a. Ambient air temperature: upper limit: +40℃; lower limit: -10℃ in general area, -25℃ in alpine area.
b. Altitude: altitude of 1000m and below.”
c. Relative humidity, daily average is not more than 95%, monthly average is not more than 90%.
d. The surrounding air should be free from corrosive or natural gas and water vapor and other obvious pollution;
e. No regular severe vibration.”
Rated voltage(kV) | 12 | ||
Rated insulation level voltage | Industrial frequency 50Hz withstand voltage 1min(kV) 1.2/5us impact withstand voltage(kV) |
Between the phases, between the phases 42 Between and on the ground 75 |
Isolation break 48 Isolation break 85 |
Rated current(A) | 400 | 630 | |
Rated short-time withstand current(kA,4S) | 12.5 | 20 | |
Rated peak withstand current(kA) | 31.5 | 50 | |
Load switch, earth switch, closing capacity (kA, peak) | 31.5 | 50 |
Welded elbows in stainless steel pipe fittings can cause corrosion when used incorrectly. After corrosion occurs in welded stainless steel elbows, the pipe wall of t...
Thin-walled elbows in stainless steel pipe fittings are a common pipe connection component. They are generally sanitary grade. The grooves are generally flat and hav...
Flanged joints in stainless steel pipe fittings are a kind of connecting material commonly used in the construction and engineering fields. It uses a stamping proces...
There are also many ways to process stainless steel flanges. Many of them still belong to the category of mechanical processing, and the most commonly used methods a...